不銹鋼材料板1.4313是馬氏體級，耐被腐化性高朝，熱辦理后耐力性好。X3CrNiMo13-4鋼的機戒性特點是會因為電化學好分中鉬和鎳的高含碳量。以上和金填加劑限止了加大級碳含碳量的想要——給定氨水濃度很大于奧氏體不銹鋼材料板。也許鎳含碳量低，但鎳含碳量約為4%，明顯延長了鋼對各項被腐化性情況的抗御力——二級機戒性特點。X3CrNiMo13-4鋼玩家可研發銷售可高達300℃在熱度下辦公的零配件和零配件，包括裸漏在各項被腐化性情況中的零配件，時候穩定至少的外觀前提括抗氯化物的性質)。QT650.QT780和QT900前提下，熱辦理后里常交房形鋼。半產品用作變壓器油研發銷售.熱.在有色金屬冶煉和生物質能源業領域，泄壓閥機裸漏在高平穩溫度過低下.泵.再空調壓縮機主件。鋼痛感合對焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50供應商EN1.4313馬氏體不銹鋼管兼有熱處理回火基本特征（+A）感覺、蘸火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，需求哪其中一個需要要跟國際業務說明確哦。